環氧地坪施工的流程和施工后的保養規則。環氧地坪施工的方案有很多種，但是大概的流程都是差不多的。今天就給大家分享一下環氧地坪施工的流程過程和施工后的保養都有哪些規則吧！首先我們來說說環氧地坪施工流程大概要經過哪幾步？

The process of epoxy floor construction and the maintenance rules after construction. There are many construction schemes for epoxy flooring, but the process is almost the same. Today, let's share with you the process of epoxy floor construction and the rules of maintenance after construction. First of all, let's talk about the construction process of epoxy flooring, which steps should we go through? 

一、環氧地坪施工原料

I. Raw materials for epoxy floor construction

二、該環氧環氧地坪施工用途

II. Construction Use of the Epoxy Floor

三、施工基面：檢查與準備

3. Construction Base Surface: Inspection and Preparedness

四、環氧環氧地坪施工的基本流程

4. Basic Process of Epoxy Floor Construction

再來說說環氧地坪施工后的保養規則都有哪些？

What are the maintenance rules of epoxy floor after construction?

1、地面如有粗硬砂粒、泥漿應及時掃除干凈，以免砂粒碾磨地面，減少地面磨損。

1. If there are coarse and hard sand grains and mud on the ground, they should be cleaned in time to avoid grinding and reduce ground wear.

2、容易受到污染的區域，比較顯眼的門面部位，走郎應每天用寬布拖把清潔1-2次。

2. In areas susceptible to contamination, more prominent facial areas should be cleaned 1-2 times a day with a wide cloth mop.

3、叉車、鏟車卸貨時注意貨物平放，避免貨物側侄、拖拽刮傷地面。

3. When unloading forklift trucks and forklifts, attention should be paid to placing the cargo level, so as to avoid cargo side nephew and dragging scratch on the ground.

4、員工進入潔凈區之前應換軟底鞋；在容易帶進砂粒、泥漿的交接處、出入口設置塑料毯，方便員工出入時清除鞋底雜物。

4. Employees should change their soft soles before entering the clean area. Plastic blankets should be installed at the junction where sand and mud are easily brought in and at the entrance and exit to facilitate the removal of sole debris when employees enter and exit.

5、車輛、叉車、鏟車運行時盡量避免剎車。

5. Avoid braking when running vehicles, forklifts and forklifts.

6、機修工具盡量避免砸落地面。

6. Machine repair tools should avoid falling to the ground as far as possible.

7、如有大的漆膜破損，及時報修，以便在油污滲入基礎之前進行修補作業。車間用水沖洗地面時，避免油水混合物沉積在深度破損處。

7. If the paint film is damaged, report it in time for repairing before the oil seeps into the foundation. When washing the floor with water in the workshop, avoid oil-water mixture depositing in deep damaged areas.

8、經常滲油漏油的部位，用鋸末經常清潔，以免油份變性、吸附灰層，成為頑固性污漬。大面積油浸的區域，可用寬布拖把，推動鋸末吸干地坪油份。

8. Sawdust is often used to clean the parts where oil often leaks, so as to avoid oil denaturation and dust adsorption, and become a stubborn stain. Wide cloth mops can be used to promote sawdust to absorb oil from the floor in large oil-immersed areas.